Energy prices are rising slowly and steadily. With a growing world population and the increasing scarcity of fossil fuels, there is no reason to believe that energy prices will reduce in the short term (if ever). As a result, many homeowners are turning to renewable or “green” technologies as a means of reducing energy bills and improve the value of their property.

Unfortunately, the technology of renewable remains expensive. Even if a system of renewable energy at home will eventually pay for itself (in twenty years), to come with the money for the initial installation may be prohibitive. Even solar panels, maintenance less costly and perhaps the weakest of all green technologies, cost hundreds of dollars. Paying a professional to install a solar power to your home quickly can be several thousand dollars. You can build your own solar panels and save up to 30% of the cost.
Fortunately, almost all the materials needed to build the solar house can be found at your local store (like Home Depot) and the electronics store (like Radio Shack).

The only exception is the solar cells are thin, flat leaves that convert sunlight into electricity. The on-line, however, can be purchased easily from a wide selection of companies. The cost of each solar cell is between six and ten dollars each, depending on size. Increase the production of solar cells more electricity, to buy the biggest you can get.

How to build solar houses?

1. First, a solar cell alone, however, does not produce electricity more simple objects of 45 watts per square centimeter. Consequently, many solar cells must be linked in a matrix to be effective. The average size of a house with solar panels, however, consists of 36 solar cells.

2. Then, determine the strengths and weaknesses of each solar panel.

3. Using a soldering iron and resin 8 oz lean (found in any hardware store), interconnect wires for welding conserved (about four inches long, but please adjust the length of your needs) for the connection panel on the aspects negatives of the 36 solar cells.

4. Thus, all the welds of solar cells in a chain. Many people organize them into an S-shaped model to save space. Solder interconnect cables provides a strip of solar cells that connects the positive side of the adjacent cell.

5. Although not required, is beneficial for the coating of solar cells varies between the two pieces of sheet of protective material, such as EVA (ethylene vinyl acetate). This will protect solar cells from the ravages of time and prolong the life of the solar panel. Furthermore, most people build their entire solar cells, plastic or wooden frames to prevent hard and smooth.

6. Take the pieces of insulated wire (about three centimeters in length) and solder the positive wire of the first solar cell and the negative pole of solar cells last year.

7. Take three pieces of wire code-inch color (usually red for positive and black for negative) and the welding wire solar cell interconnection in the first and last. Of course, this is only the solar panel for electricity from solar panels on its decision will have more material and labor. For example, you must establish a set of batteries to store electricity and an inverter for converting DC to 120 volt DC battery used by appliances and more.

Fortunately, many books and websites that we talk through these stages of building a solar power plant. To build home solar panel is only the first step, but can save you money.